Isollat-01 Building Exterior and Interior Liquid Thermal Insulation Plaster

ISOLLAT-01 – is a general purpose, new generation nano technology liquid thermal insulation material in thixotropic structure, consisting of a mixture of microscopically expanded air-filled full silicate microceramic spheres, polymer resins, stabilizers, pigments, modifiers and a binding liquid polymeric structure.

Continuous Operating Temperature Range: -60ºС / +150ºС(Peak+170ºС )

Liquid Thermal Insulation Plaster

It provides effective thermal insulation against heat in summer and cold in winter.

Packaging Dimensions

Available with 19 liter buckets.

Technical Features and Advantages

It is impermeable to radiant and conduction heat.
It is highly reflective, reflecting the sun’s rays and radiant energy to a great extent.
It provides energy saving up to 40%.
It can be applied to interior and exterior surfaces.
It has diffusion transition (breathable) feature.
It prevents the formation of moisture and mold on the wall.
It also has sound insulation feature,
Dirt-proof, wipeable, easy to clean.
It is hardly flammable and has non-flammability feature.
Insulation (dielectric) property

Noise and vibration suppression
It is resistant to mechanical impacts.
Its color is white. It can be colored. Paint can be applied on it.
It is not affected by acids, bases and salts.
Labor costs are low, application is easy and short.
At least 40 years of life in structures without loss of performance.
It is free of rodents, insects, and airborne pathogens.
It can be applied to any surface (plastic, metal, concrete, adobe, brick, wood and other).
It is very light. It does not put a load on the structure, vehicle or equipment to which it is applied, and provides volume savings.
It is extremely light and very flexible. In this way, it can expand and contract with the surface on which it is applied.

Usage Areas

On the interior and exterior of buildings
On Roofs and Upper Floor Ceilings
On Balconies and Porches
In Building Parking Lots and Ground Floors
Historical Artifacts in Buildings
Prefabricated Buildings on Roofs, Walls and Floors
Container structures (office, home and other)
Steel Buildings
In Hangars and Garages
In Intermediate Panels Forming Thermal Bridge in Buildings

Mechanical and Physical Specifications

Liquid Density: 0.6 kG/dm3
Finished Coating Density : 0,4 kG/dm3
Brukfild Apparent Viscosity (Rotor R4, 10 rpm) : 12.000-16,000 cP
One Layer Liquid Coating (0.5 mm) weight: 0.3 kg/m2
Tensile Strength: 80 kgf/cm²
Elongation Percentage at Break: 5%
Light Reflection : 90%
Light Diffusion (IR light): 95%

Nominal Thermal Conductivity Coefficient: 0,002 W/mK
Adhesion Force: Metal 1 point, Concrete 25 kg/cm2
Lifespan: At least 40 years
Water Permeability : < 30 Gram/m² 24 hours
Water Vapor Permeability Coefficient: 0.012 mg/m hour
Color: White (can be colored with pigment)
Impact Resistance: No cracking, no rupture

Consumption and Suggestions

COLOR : White. It can be colored with pigment. Or water-based or synthetic-based paint can be applied on it.
CONSUMPTION: 1 Liter /m² (min. 1 mm thickness) With 19 Liter bucket: 12 – 19 m²/bucket. The amount of consumption was evaluated excluding the application conditions (ground, weather conditions and other).
PACKAGING: In 19 L PP buckets.
SHELF LIFE : 24 months from date of production if stored in original, unopened and undamaged packaging.
STORAGE CONDITIONS : Store in a dry and cool environment under air conditions above 0ºC.

Product Documentation

CE DOCUMENT
ISO CERTIFICATE
CERTIFICATE OF CONFORMITY
MSDS (Turkish)
MSDS (English)
PDS (Turkish)
PDS (English)